1280x800 7" LVDS LCD with Capacitive Touch for pcDuino3

From LinkSprite Playgound
Revision as of 01:48, 9 January 2015 by Qian.zhang (talk | contribs) (Usage)
Jump to: navigation, search

Introduction

This is a 7" LVDS LCD with capacitive touch for pcDuino3. It has a resolution of 1280x800.


Pcduino3 lvds screen V2 1.jpg

Pcduino3 lvds screen V2 2.jpg


Items Included:

  • 1 x LVDS screen
  • 1 x Driver board
  • 3 x Ribbon cable
  • 6 x Male to female jumper wires

Wire connection

We need to hook up the 6 pins headers using the male to female jumper wires in the following way:

  • gnd of the LCD driver breakout board —> GND of pcDuino
  • scl of the LCD driver breakout board —> SCL of pcDuino
  • sda of the LCD driver breakout board –> SDA of pcDuino
  • rst of the LCD driver breakout board –> D10 of pcDuino
  • int of the LCD driver breakout board –> D9 of pcDuino
  • wale of the LCD driver breakout board –> D8 of pcDuino

And make sure that the FPC ribbon is installed correctly.

Lvds pcduino 1.jpg

Lvds pcduino 2.jpg

Lvds pcduino 3.jpg

Usage

  • Step 1: Update kernel

1)Download the kernel of pcDuino3 :kernel.zip 2)Unzip the "kernel.zip",you will get a folder "kernel", then copy the folder to a USB flash disk. 2)Plug the USB flash disk on your pcDuino3, and put in following command:

$ sudo su

# mount /dev/nanda /mnt/
# ls /mnt/
# rm /mnt/uImage /mnt/script.bin
# ls /media/
# cp /media/40C3-AE90/kernel/* /mnt/
# sync


of pcDuino3 ,and add the driver of touch screen gslx680

Resources