Difference between revisions of "3D Printer Filament Tray Rack"

From LinkSprite Playgound
Jump to: navigation, search
(Created page with "== Introduction == 500px Well-designed 3D printer rack, stable feeding, low resistance! Will not shake when the material plate is over weight....")
(No difference)

Revision as of 10:16, 6 July 2016

Introduction

3D printer rack.png

Well-designed 3D printer rack, stable feeding, low resistance! Will not shake when the material plate is over weight. The position of 4 bearing wheels can be adjusted to adapt to material plate with different width.

Product Show

500px

500px


The position of 4 bearing wheels can be adjusted to adapt to material plate with different width.


500px

Application range

The application for material plate is shown in below photo:

  • Material plate diameter D is 110mm to 400mm.
  • Material plate width H is 75mm maximum.
  • Material plate flange thickness W is 5 mm maximum.
  • In above photo, the material plate size is D=200mm,H=65mm,W=4mm

500px

Shipping list

  • Grooved bearing X 4
  • stainless steel screw X 8
  • inner hexagon spanner X 1
  • 8mm Axis X 4
  • Acrylic panels X 2


3D printer rack shipping list.jpg