3D Printer Filament Tray Rack

From LinkSprite Playgound
Revision as of 03:42, 18 July 2016 by Alvin (talk | contribs) (Application range)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Introduction

3D printer rack.png

Well-designed 3D printer filament tray rack, stable feeding, low resistance! Will not shake when the filament tray is over weight. The position of 4 bearing wheels can be adjusted to adapt to filament tray with different width.

Product Show

3D printer rack 001 new photo.jpg

3D printer rack 002 new photo.jpg


The position of 4 bearing wheels can be adjusted to adapt to filament tray with different width.


3D printer rack 003 new photo.jpg

Application range

The application for filament tray is shown in below photo:

  • filament tray diameter D is 110mm to 400mm.
  • filament tray width H is 75mm maximum.
  • filament tray flange thickness W is 5 mm maximum.
  • In above photo, the filament tray size is D=200mm,H=65mm,W=4mm

3D printer rack drawing new photo.jpg

Shipping list

  • Grooved bearing X 4
  • stainless steel screw X 8
  • inner hexagon spanner X 1
  • 8mm Axis X 4
  • Acrylic panels X 2


3D printer rack shipping list English.jpg