Difference between revisions of "3mm Green LED Module"

From LinkSprite Playgound
Jump to: navigation, search
(Introduction)
(Introduction)
 
Line 3: Line 3:
 
Linker LED Module is designed for the beginners of Arduino/pcDuino to monitor controls from digital ports. It can be mounted to the surface of your box or desk easily and used as pilot lamp for power or signal. Its brightness can be adjust by potentiometer.
 
Linker LED Module is designed for the beginners of Arduino/pcDuino to monitor controls from digital ports. It can be mounted to the surface of your box or desk easily and used as pilot lamp for power or signal. Its brightness can be adjust by potentiometer.
  
[[File:Example.jpg]]
+
[[File:3mm Green LED 118101001-9 first.jpg| 640px]]
  
[[File:Example.jpg]]
+
[[File:3mm Green LED 118101001-9 second.jpg| 640px]]
  
[[File:Example.jpg]]
+
[[File:3mm Green LED 118101001-9 third.jpg| 640px]]
  
 
== Features ==
 
== Features ==

Latest revision as of 10:59, 15 July 2016

Introduction

Linker LED Module is designed for the beginners of Arduino/pcDuino to monitor controls from digital ports. It can be mounted to the surface of your box or desk easily and used as pilot lamp for power or signal. Its brightness can be adjust by potentiometer.

3mm Green LED 118101001-9 first.jpg

3mm Green LED 118101001-9 second.jpg

3mm Green LED 118101001-9 third.jpg

Features

Dimensions: 23.0×24.2×9.5mm

Net weight: 1.8g

Dimension

Led 3mm dimension.jpg

Schematics

Application Ideas

test <syntaxhighlight lang="c"> /*

 Blink
 Turns on an LED on for one second, then off for one second, repeatedly.

 This example code is in the public domain.
*/

void setup() {

 // initialize the digital pin as an output.
 pinMode(13, OUTPUT);     

}

void loop() {

 digitalWrite(13, HIGH);   // set the LED on
 delay(1000);              // wait for a second
 digitalWrite(13, LOW);    // set the LED off
 delay(1000);              // wait for a second

} </syntaxhighlight>

Test result.jpg