Difference between revisions of "Acrylic Frame Robot Platform"

From LinkSprite Playgound
Jump to: navigation, search
(Assembly Instructions)
(Introduction)
Line 2: Line 2:
  
 
[[File:Acrylic Frame robot platform.jpg]]
 
[[File:Acrylic Frame robot platform.jpg]]
 +
 +
[[File:Acrylic robot package list.jpg]]
  
 
== Package List ==
 
== Package List ==

Revision as of 06:32, 2 September 2014

Introduction

Acrylic Frame robot platform.jpg

Acrylic robot package list.jpg

Package List

Explanation of Acrylic Top Plate

Explanation of top.jpg

Assembly Instructions

  • Solder Jumper Wires on both DC Motors. Use 4 M3*25 screws to fix the DC motors on Acrylic Bottom Plate, note that the bump of DC motors should be aimed to the holes on Acrylic Bottom Plate.

Acrylic robot platform1.jpg


  • Use 2 M3*12 screws to fix Ball Caster Metal on Acrylic Bottom Plate.

Acrylic robot platform2.jpg


  • Use 2 M3*12 screws to fix Batter Case on Acrylic Bottom Plate.

Acrylic robot platform3.jpg

Acrylic robot platform4.jpg


  • Use 2 M3*12 screws to fix Acrylic Connecting Plate(6 holes) on the left side(from top view, the battery case is at bottom) of Acrylic Bottom Plate, use another 2 M3*12 screws to fix Acrylic Connecting Plate(5 holes) on the other side.

Acrylic robot platform5.jpg


  • Install two wheels.

Acrylic robot platform6.jpg


  • Use 4 M3*12 screws to fix Acrylic Top Plate on Acrylic Bottom Plate.

Acrylic robot platform7.jpg