Difference between revisions of "Basic 16x2 Character LCD - Black on Green 5V"
(Created page with "This is a basic 16 character by 2 line display. Black text on Green background. Utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is...") |
Katherine.d (talk | contribs) |
||
Line 7: | Line 7: | ||
Connections to Arduino: | Connections to Arduino: | ||
− | + | '''The circuit:''' | |
* LCD RS pin to digital pin 12 | * LCD RS pin to digital pin 12 | ||
− | |||
− | + | * LCD Enable pin to digital pin 11 | |
− | |||
− | + | * LCD D4 pin to digital pin 5 | |
+ | |||
+ | |||
+ | * LCD D5 pin to digital pin 4 | ||
+ | |||
+ | |||
+ | * LCD D6 pin to digital pin 3 | ||
+ | |||
+ | |||
+ | * LCD D7 pin to digital pin 2 | ||
− | |||
Parallel LCDs run off of +5V so you can just solder the Vcc (pin 2 in LCD)wire to 5V and the ground (pin 1 in LCD) wire to GND. | Parallel LCDs run off of +5V so you can just solder the Vcc (pin 2 in LCD)wire to 5V and the ground (pin 1 in LCD) wire to GND. |
Revision as of 02:12, 27 April 2013
This is a basic 16 character by 2 line display. Black text on Green background. Utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need ~11 general I/O pins to interface to this LCD screen. Includes LED backlight.
Works on either 4 bit or 8 bit mode. For Arduino LCD library, Please refer to http://arduino.cc/en/Reference/LiquidCrystal?from=Tutorial.LCDLibrary.
Connections to Arduino:
The circuit:
- LCD RS pin to digital pin 12
- LCD Enable pin to digital pin 11
- LCD D4 pin to digital pin 5
- LCD D5 pin to digital pin 4
- LCD D6 pin to digital pin 3
- LCD D7 pin to digital pin 2
Parallel LCDs run off of +5V so you can just solder the Vcc (pin 2 in LCD)wire to 5V and the ground (pin 1 in LCD) wire to GND.
* 10K resistor:
* ends to +5V and ground
* wiper to LCD VO pin (pin 3)
How to run Arduino examples:
Documents:
GDM1602K.pdf Extended Datasheet Dimensions: 3.15" x 1.425"