Battery for Robot 4800mAH Europe Edition
Revision as of 10:03, 17 October 2014 by Qian.zhang (talk | contribs) (Created page with "== Introduction == This is a battery pack for robot application. This edition contains an Europe wall adpter. File:rover batt europe.jpg ==Specification== Battery: Inpu...")
Introduction
This is a battery pack for robot application. This edition contains an Europe wall adpter.
Specification
Battery: Input: 12.6VDC Output: 12VDC, 4800mAH Charger: Input: 110-240VAC 50/60Hz Output: 12.6DC, 350mA
Hardware Included:
- Wall adapter charger
- Rechargeable Li-on battrery
Usage
There is a switch on the battery pack. Please turn the switch to the ON position during charging and discharging.
On the switch, there is a LED there to indicate the charging.
A charger is included to charge the battery. To charge the battery, the connection is as following:
When applying AC power to wall adapter, the red LED will turn on. The green LED will turn on when charging battery.
