CAN-BUS Shield for Arduino

From LinkSprite Playgound
Revision as of 05:22, 29 January 2015 by Qian.zhang (talk | contribs) (Specification)
Jump to: navigation, search

Introduction

CAN – BUS is a common BUS industry, because of its support for a long distance, medium speed and high reliability of communication.It is often found in modern machine tools and Automotive diagnostic bus.The CAN – BUS expansion board adopt the CAN BUS controller of MCP2515, SPI interface and MCP2551 CAN transceiver, communicate with your Arduino. With OBD II conversion line and the improvement of the OBD II – library, you can create an on-board diagnosis device or data recorder.

  • The CAN transfer rate is as high as 1 Mb/s
  • SPI interface transmission rate is as high as 10 MHz
  • Standard (11bite) and (29 bite) data transmission
  • The two have the priority to accept the cache information
  • 9 needles industry standard sub – D interface
  • Two LED indicators

Can-bus shield.jpg

Specification

Working Voltage: 4.8~5.2V

Size: 68 x 53mm

Schematics

Usage

Resources