GPS Shield With SD Card Slot for Arduino V2.0 A

From LinkSprite Playgound
Revision as of 09:37, 16 November 2012 by Katherine.d (talk | contribs) (Schematic)
Jump to: navigation, search

Introduction

This GPS shield is designed for Arduino Uno. This shield integrates SR-92 GPS module and a SD card slot. As the SR-92 module and SD works with 3.3V, a 3.3V power supply module is embedded to the shield. This shield can work independently from Arduino, and you can use the PC to receive the data from the board. User can use a serial terminal in PC to read the SR-92 data and read/write to the SD card.

Model:SOLID_GPS_SD_SHIELD

Sd gps shield.jpg

Features

  • With Micro SD interface
  • Active antenna design with high receive sensitivity, compatible normal antenna
  • Extremely fast time to first fix at low signal level
  • UART interface
  • Operation temperature: -40℃ ~ +85℃

Application Ideas

Cautions

The warnings and wrong operations possible cause dangerous.

Schematic

GPS Shield with SD Card Slot for Arduino V2.0 Schematic in PDF

Specification

PCB 55.88mm X 54.1mm X 1.6mm
Indicators PWR
Power Supply compatible with Arduino
Communication Protocol UART
RoHS Yes

Pin definition and Rating

Arduino PIN Description
D0 Data
D1 Din
D2 -
D3 -
D4 -
D5 -
D6 -
D7 -
D8 -
D9 -
D10 CSN
D11 MOSI
D12 MISO
D13 SCK
A0 BREAKOUT
A1 BREAKOUT
A2 BREAKOUT
A3 BREAKOUT
A4 IIC_SDA
A5 IIC_SCL

Mechanic Dimensions

Usage

Hardware Installation

Programming

FAQ

Please list your question here:

Support

If you have questions or other better design ideas, you can go to our forum to discuss or creat a ticket for your issue at linksprite support.

Resources

How to buy

See Also

Other related products and resources.

Licensing

This documentation is licensed under the Creative Commons Attribution-ShareAlike License 3.0 Source code and libraries are licensed under GPL/LGPL, see source code files for details.