Home Automation Kits with pcDuino and BLE4.0

From LinkSprite Playgound
Revision as of 06:20, 19 July 2016 by Alvin (talk | contribs) (Introduction)
Jump to: navigation, search

Introduction

OpenHAB.jpg

Before this article, there is post about DIY Smart home connecting through Wifi. Nowadays, the wearable devices such as smartbands and smart watch are extremely popular. So it’s time to talk about Bluetooth4.0, this article is all about how to DIY your own smart home using BLE4.0 Shield and BLE4.0 Bee as connection devices, pcduino as openhab server, Arduino as device.

Usage

Install openHAB

Install openHAB server software on pcDuino, get more detail form linksprite learn center:

[File:http://learn.linksprite.com/?s=openhab]

or, download the image file below, then update ( install openh under “/opt/openhab” folder):

code: fh6c

For more detail about how to use BLE4.0 shield ( the usage of BLE4.0 Bee is the same as BLE4.0 Shield )

[1]