Difference between revisions of "LDR Module"

From LinkSprite Playgound
Jump to: navigation, search
(Introduction)
(Introduction)
Line 6: Line 6:
  
 
[[File:N17DH WITHOUT PACKAGED BACK.jpg|640px]]
 
[[File:N17DH WITHOUT PACKAGED BACK.jpg|640px]]
 
[[File:N17DH PACKAGED FRONT.jpg|640px]]
 
 
[[File:N17DH PACKAGED BACK.jpg|640px]]
 
  
 
== Features ==
 
== Features ==

Revision as of 07:10, 30 March 2016

Introduction

The light sensor, also known as the light dependent resistor (LDR). Typically, the resistance of the light sensor will decrease when the ambient light intensity increases.

640px

640px

Features

Dimensions: 20.0×24.2×10.6mm

Net weight: 1.9g

Dimension

Light sensor dimension.jpg

Schematics

Application Ideas

test code <syntaxhighlight lang="c">

  1. include <math.h>

const int ledPin=12; //Connect the Linker LED module to Pin12, Digital 12 const int thresholdvalue=10; //The treshold for which the LED should turn on. Setting it lower will make it go on at more light, higher for more darkness

void setup() {

 Serial.begin(9600);                //Start the Serial connection
 pinMode(ledPin,OUTPUT);            //Set the LED on Digital 12 as an OUTPUT

} void loop() {

 int sensorValue = analogRead(0);  //Connect the Linker LDR module to A0, Analog 0
 float Rsensor;
 Rsensor=(float)(1023-sensorValue)*10/sensorValue;

 if(Rsensor>thresholdvalue)
 {
   digitalWrite(ledPin,HIGH);
 }
 else
 {
 digitalWrite(ledPin,LOW);
 }

 Serial.println(Rsensor,DEC);

} </syntaxhighlight>

LDR link.jpg

How to buy

Here to buy LRD Module on store