Laser Head for DIY CNC 3 Axis Engraver Machine 2.5W

From LinkSprite Playgound
Revision as of 03:05, 27 April 2017 by Alvin (talk | contribs) (Introduction)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Introduction

This is a Laser Head for DIY CNC 3 Axis Engraver Machine PCB Milling Wood Carving Router Kit Arduino Grbl.

The optical output power is 2.5w

This is a Laser engraving machine dedicated module.

Laser Head 2.5W.jpg

Laser Head 2.5W 3.jpg

Laser Head 2.5W 5.jpg

Laser Head 2.5W 4 mark.jpg

Specification

  • Speckle pattern: dot (focus)
  • The wavelength of this laser is 445nm(blu-ray)
  • Driving mode: ACC (constant current driver)
  • The cooling way: forced air cooling
  • The input voltage: 12 v DC
  • Input mode: XH - 2 p
  • Dimension: 33 x33x62. 4 mm (including the thickness of the fan)

User Agreement

  • The power of laser module is relatively high, only for industrial use. Lighting directly to eyes is forbidden which will hurt the eyes.
  • It is prohibited to use in the place where there are inflammable materials and gas, or it could cause fires and explosions.
  • Children are prohibited from contacting with the laser product.
  • Do not open the case of this module or it could be damaged.