Difference between revisions of "LinkNode Base Shield for LinkNode D1"

From LinkSprite Playgound
Jump to: navigation, search
(Introduction)
(Introduction)
Line 1: Line 1:
 
== Introduction ==
 
== Introduction ==
LinkNode base shield for LinkNode D1 is designed for the connection of LinkNode series sensors to LinkNode D1.
+
LinkNode base shield is designed for the connection of LinkNode series sensors to LinkNode D1.  
We use 2.00mm interface instead of 2.54mm which used on Linkerkit series.
+
 
 +
It provides 2.00 mm contact pitch header instead of 2.54 mm. We will launch various LinkNode series sensors in near future.
  
 
[[File:D1 V2.0 A.png|540px]]
 
[[File:D1 V2.0 A.png|540px]]

Revision as of 02:08, 20 April 2017

Introduction

LinkNode base shield is designed for the connection of LinkNode series sensors to LinkNode D1.

It provides 2.00 mm contact pitch header instead of 2.54 mm. We will launch various LinkNode series sensors in near future.

D1 V2.0 A.png

D1 V2.0 B.png

D1 V2.0 C.png

Feature

  • GPIO x 7
  • I2C x 4
  • SPI x 1
  • Uart x 1