Linker Block Basic Robot Platform Set A

Introduction

Linker Block set is a Lego compatible Aluminium robot kit. It can be used to build a metal robot or structure of any size, and scales up conveniently.

This is a kit that can used to build a linker block basic robot.

The assembled robot:

The picture of the kit:

Parts List

It includes the following components:

• 1 x Linker Block 12 Lego Holes Long Grooved Beam -Aluminium
• 1 x Linker Block 9x18 Lego Holes Sheet -Aluminium
• 1 x Linker Block Tire a Diameter of 5.6cm
• 1 x Linker Block 90 Degree Fixture With a Length of 6 Holes
• 2 x Linker Block DC Motor
• 2 x Block Motor Fixture Plate -Aluminium
• 2 x Linker Block Curved Beam with 4 Holes
• 2 x Block Shaft Connector
• 2 x Linker Block Gear Wheel with a Diameter of 5.6cm
• 6 x Linker Block M2x5 Screw
• 24 x Linker Block Plastic Washer M4
• 24 x Linker Block M4x14 Bolt
• 24 x Block M4 Nut

Resources

• Assembly Instructions of a Basic Robot Platform Using Linker Block Set
• Mount and Configure pcDuino for Basic Robot Platform Using Linker Block Set