Linker Block Basic Robot Platform Set A

Introduction

Linker Block set is a Lego compatible Aluminium robot kit. It can be used to build a metal robot or structure of any size, and scales up conveniently.

This is a kit that can used to build a linker block basic robot.

The assembled robot:

The picture of the kit:

Parts List

It includes the following components:

• 1 x Linker Block 12 Lego Holes Long Grooved Beam -Aluminium [LB_12HGB][132201001]
• 1 x Linker Block 9x18 Lego Holes Sheet -Aluminium [LB_9B18_SHT][132201004]
• 2 x Linker Block Tire a Diameter of 5.6cm [LB_TIRE5P5][132201012]
• 1 x Linker Block 90 Degree Fixture With a Length of 6 Holes [LB_RETFIX6HOLE][132201010]
• 1 x Linker Block Screw Driver for Hexagon M4 [LB_M4_SWDRV][132201014]
• 2 x Linker Block DC Motor [LB_DCMOTOR][132201007]
• 2 x Linker Block Motor Fixture Plate -Aluminium [LB_MOTFIXPLATE][132201008]
• 2 x Linker Block Curved Beam with 4 Holes [LB_4HCVBEAM][132201002]
• 2 x Linker Block Shaft Connector [LB_NODESHFT][132201005]
• 2 x Linker Block Gear Wheel with a Diameter of 5.6cm [LB_WHEEL5P6][132201011]
• 6 x Linker Block M2x5 Screw [LB_M2X5_SRW][132201018]
• 24 x Linker Block Plastic Washer M4 [LB_M4_WH][132201017]
• 24 x Linker Block M4x14 Bolt [LB_M4X14_BOLT][132201015]
• 24 x Linker Block M4 Nut [LB_M4_NUT][132201016]

• 1 x Ball Caster Metal [BOT_PT_OMNIDMETAL][104201008]
• 10 x Single wire as Male to Male Jumper Wire [IT_JUMR_MM_PK40_WI20CM][BB101104]

Resources

• Assembly Instructions of a Basic Robot Platform Using Linker Block Set
• Mount and Configure pcDuino for Basic Robot Platform Using Linker Block Set