Linker Mezzanine card starter kit for 96board

From LinkSprite Playgound
Revision as of 05:35, 25 December 2015 by Alvin (talk | contribs)
Jump to: navigation, search


Description

Arrow3874.JPG

Linker Mezzanine card starter kit has a shield breadout board designed for 96Boards. All the Linker kit modules can be plugged onto 96Boards through this card. It arrives in a plain white cardboard box, and inside it has a loft modules of Linker kit including button, LED, touch sensor, tilt module, relay and so on. This starter kit is a great way to get started with 96Boards, and it cotains the components you need to make 8 fun projects following the step-by-step tutorials. Starting the basics of electronics modules, to more complex projects, the kit will help you control the physical world with sensor and actuators, also help you quick start on progamming using 96Boards.

The kit contains a Linker Mezzanine card which make connection easy to modules of Linker kit. There are 8 spacing houing on the card and these connectors covering Analog, UART, I2C and GPIO. There are bidirectional voltage-level translators which allows for low-voltage bidirectional translation between any of the 1.2-V,1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. So it compatibles with 3.3V or 5V module and make connecting peripheral more easily. You just plug a jumper onto JP9 to select which input voltage do you have. Moreover, this shield has an on-board ADC chip so that analog output modules can be used on 96board. The ADC chip used is MCP3004. It talks to 96Boards using SPI interface.

Features

  • Linker Mezzanine card
    • 8 connecctors covering Analog, UART, I2C and GPIO
    • Two channels of analog input using MCP3004 ADC chip
  • Button module of Linker kit
  • RED LED module of Linker kit
  • LDR module of Linker kit
  • Thermal module of Linker kit
  • Tilt module of Linker kit
  • Touch sensor module of Linker kit
  • Relay module of Linker kit

Package list

Button Module [LINKER_BUTTON][118101002] Linker Mezzanine card 5mm RED LED Module [LINKER_5MMGREEN][118101001] << 需要修改!!!好像是红色的! LDR Module [LINKER_LDR][118101003] Thermal Module [LINKER_TEMP][118101005] Linear/Slide Potentiometer Module [LINKER_LINEPOTENT][118101006] Tilt Module [LINKER_TLT][118101004] Touch Sensor Module [LINKER_TOUSEN][118101007] Relay Module [LINKER_RELAY][118101008] 50cm cable for Linker Kit 《《需要核对信息


Tutorials