Difference between revisions of "Linker kit Base Shield for Raspberry Pi with ADC Interface"
| Line 1: | Line 1: | ||
| + | == Description == | ||
| + | This is a Linker kit base shield for Raspberry Pi with ADC interface. All the Linker kit modules can be plugged onto Raspberry Pi through this base shield. Moreover, this shield has an on-board ADC chip so that analog output modules can be used on Raspberry Pi. The ADC chip used is MCP3004. It talks to Raspberry Pi using SPI interface. | ||
| + | [[File:P24-1.jpg | 400px]] | ||
| + | |||
| + | |||
| + | == Specification == | ||
| + | There are 8 4-pin 2.54mm spacing housing on the base shield: | ||
| + | *JP1: A0, A1, VCC, GND. | ||
| + | *JP2: A2, A3, VCC, GND. | ||
| + | *JP3: SCL, SDA, VCC, GND. | ||
| + | *JP4: RXD, TXD, VCC, GND. | ||
| + | *JP5: P17, P18, VCC, GND. | ||
| + | *JP6: P27, P22, VCC, GND. | ||
| + | *JP7: P23, P24, VCC, GND. | ||
| + | *JP8: P24, P4, VCC, GND. | ||
| + | These connectors cover Analog, I2C, and GPIO. | ||
| − | + | ==Install Base Shield on Raspberry Pi== | |
[[File:P24-3.jpg | 400px]] | [[File:P24-3.jpg | 400px]] | ||
| + | |||
| + | == Schematics == | ||
| + | *[https://s3.amazonaws.com/linksprite/LinkerKit/RPi_ADC.pdf Schematics] | ||
| + | |||
| + | == Tutorial == | ||
Revision as of 16:06, 29 July 2013
Contents
Description
This is a Linker kit base shield for Raspberry Pi with ADC interface. All the Linker kit modules can be plugged onto Raspberry Pi through this base shield. Moreover, this shield has an on-board ADC chip so that analog output modules can be used on Raspberry Pi. The ADC chip used is MCP3004. It talks to Raspberry Pi using SPI interface.
Specification
There are 8 4-pin 2.54mm spacing housing on the base shield:
- JP1: A0, A1, VCC, GND.
- JP2: A2, A3, VCC, GND.
- JP3: SCL, SDA, VCC, GND.
- JP4: RXD, TXD, VCC, GND.
- JP5: P17, P18, VCC, GND.
- JP6: P27, P22, VCC, GND.
- JP7: P23, P24, VCC, GND.
- JP8: P24, P4, VCC, GND.
These connectors cover Analog, I2C, and GPIO.
Install Base Shield on Raspberry Pi
