ONetSwitch45

Introduction

ONetSwitch45 is an All Programmable open networking innovation platform. ONetSwitch45 is based on the Xilinx Zynq-7000 SoC, adopts the Gigabit ports and the 10G ports, and can extend wireless or storage. Both its software and hardware can realize custom programming. Its reference designs are abundant and flexible, can be used to various researches on the evolution of network prototypes, and the development of customized network products. Especially, the features of the miniaturization and low power are adapted to the multi-node network tests and deployments.

Features

• General

Main Silicon XC7Z045-2FFG676
Power Supply DC 12V
Primary Config. SD card
Auxiliary Config. QSPI flash/JTAG
Processing System

• Processor Dual ARM Cortex-A9@800MHz

Cache (L1)32KB Inst. + 32KB Data per core; (L2)512KB; (OCM)256KB
DRAM DDR3 1GBytes
Flash Quad SPI flash 256Mb
DMA 8 channel (4 for Programmable Logic)
Ethernet 1x GE RJ45
Peripherals USB / USB-UART / USB JTAG / SD card

• Programmable Logic

FPGA Logic 350K LCs, Kintex-7, ~5.2M ASIC gates
Host I/F AMBA AXI4 interconnect, max 100Gbps between PS-PL
SRAM QDRII+ 72Mb, 57.6Gbps@400MHz
Ethernet 4x GE RJ45, 4x 10GE SFP+
Peripherals FMC HPC, including 3x 10Gbps XCVRs
User IO user LEDs/push buttons/DIP switch
Extension mini PCIe for wireless NIC or SSD

Block Diagram