Plug and Play P2P 16 Channels Relay Kit With WiFi and Dual RJ45 ports Connections

From LinkSprite Playgound
Revision as of 01:54, 3 November 2015 by Guoqiang.zhang (talk | contribs) (Created page with "===Product Description=== This plug and play wifi 16-channel relay kit enables users to control any relay out of the 16 relays from an Android device. It uses a P2P technolo...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Product Description

This plug and play wifi 16-channel relay kit enables users to control any relay out of the 16 relays from an Android device. It uses a P2P technology that doesn't require the complicated router port forwarding, and doesn't need DynDNS or static WAN IP address either

Specification

Electrical Specification

  • Input voltage: 5V
  • Input current: 2A
  • Max Input voltage for relay: 200V
  • Max input current for relay: 10A
  • Ouptut channels: 16
  • Default IP address: 192.168.16.254
  • Default port: 8080
  • Cascaded network number: unlimited

Outline and diamension

outline and diamension

]

When first powered up, the modue will setup an access point named HI-LINK_XXXX, where XXXX changes module by module. The default password to the SSID is 12345678. To configure the module, first connect the PC to the access point created by the module HI-LINK_XXXX, and then point the browser to:

http://192.168.16.254/ser2net.asp.

We can then configure the network setting, and serial port setting.

How to buy

Here to buy Smartworld Solar Panel Sensor Kit Compatible with Arduino on store

Retrieved from "https://wiki.linksprite.com/index.php?title=Plug_and_Play_P2P_16_Channels_Relay_Kit_With_WiFi_and_Dual_RJ45_ports_Connections&oldid=7554"