RFM69 WIRELESS TRANSCEIVER: 915MHZ, 13DBM

From LinkSprite Playgound
Revision as of 07:54, 6 January 2016 by Alvin (talk | contribs) (Created page with "File:1-14.jpg == Description == The RFM69 is the successor to the ever popular RFM12 from HopeRF. It is a highly integrated RF transceiver capable of operation over a wi...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

1-14.jpg

Description

The RFM69 is the successor to the ever popular RFM12 from HopeRF. It is a highly integrated RF transceiver capable of operation over a wide frequency range, including the 433, 868 and 915 MHz license-free ISM (Industry Scientific and Medical) frequency bands. Its highly integrated architecture allows for a minimum of external components whilst maintaining maximum design flexibility. All major RF communication parameters are programmable and most of them can be dynamically set. The RFM69 offers the unique advantage of programmable narrow-band and wide-band communication modes without the need to modify external components. The RFM69 is optimized for low power consumption while offering high RF output power and channelized operation. TrueRF™ technology enables a low-cost external component count (elimination of the SAW filter) whilst still satisfying ETSI and FCC regulations.


Communication with the RFM69HW module is via a standard 4-wire SPI interface. Three configurable general purpose I/Os are also available, the use of which can be tailored for the needs of your project or solution. The RFM69HW also incorporates a range of other features, including an 8-bit ADC, temperature sensor, RX and TX FIFOs, and low-battery detection. A datasheet for this product is available below (manufacturer provided)

The module comes in a 16-pin, 16 x 16mm, SMD package, with pins spaced by 2mm.


KEY PRODUCT FEATURES

  • +13 dBm Power Output Capability
  • High Sensitivity: down to -120 dBm at 1.2 kbps
  • High Selectivity: 16-tap FIR Channel Filter
  • Bullet-proof front end: IIP3 = -18 dBm, IIP2 = +35 dBm,80dB Blocking Immunity, no Image Frequency response
  • Low current: Rx = 16 mA, 100nA register retention
  • Programmable Pout: -18 to +13 dBm in 1dB steps
  • Constant RF performance over voltage range of chip
  • FSK Bit rates up to 300 kb/s
  • Fully integrated synthesizer with a resolution of 61 Hz
  • FSK, GFSK, MSK, GMSK and OOK modulations
  • Built-in Bit Synchronizer performing Clock Recovery
  • Incoming Sync Word Recognition
  • 115 dB+ Dynamic Range RSSI
  • Automatic RF Sense with ultra-fast AFC
  • Packet engine with CRC-16, AES-128, 66-byte FIFO
  • Built-in temperature sensor

DOWNLOADS

RFM69HW Datasheet

RFM69HW 433MHz FCC Test Report – Manufacturer Provided

RFM69HW 433MHz ETSI Test Report – Manufacturer Provided

RFM69HW Demo Code – Manufacturer Provided

Sample for Arduino

Sample for Raspberry Pi