Difference between revisions of "Relay Shield"

From LinkSprite Playgound
Jump to: navigation, search
(Usage)
 
(7 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 
== Introduction  ==
 
== Introduction  ==
  
The Relay Shield is an Arduino compatible smart module with 4 mechanical relays providing an easy way to control high voltage. The max switching power is 35VDC 70W for each channel. It can be directly controlled by Arduino through digital IOs with external 9V DC supply. With the XBee form socket and 315/433MHz RF module interface, the Relay shield can be remotely controlled, making it easy to use in robotics, industry control, smart houses etc.<br> '''Note''': Take care the pins on the Shield should not be touched with USB connector of Arduino UNO when they are connected .  
+
The Relay Shield is an Arduino compatible smart module with 4 mechanical relays providing an easy way to control high voltage. The max switching power is 35VDC 70W for each channel. It can be directly controlled by Arduino through digital IOs with external 9V DC supply. With the XBee form socket and 315/433MHz RF module interface, the Relay shield can be remotely controlled, making it easy to use in robotics, industry control, smart houses etc.<br> '''Note''': Take care the pins on the Shield should not be touched with USB connector of Arduino UNO when they are connected .
 +
 
 +
[[File:N02DH WITHOUT PACKAGED FRONT1.jpg]]
 +
 
 +
[[File:N02DH WITHOUT PACKAGED BACK.jpg | 640px]]
 +
 
  
 
== Features  ==
 
== Features  ==
Line 83: Line 88:
 
|}
 
|}
  
 +
== Schematics ==
 +
*[https://s3.amazonaws.com/linksprite/Shields/relay_shield/Relay+shield+v1.3.pdf Schematics]
  
  
Line 142: Line 149:
 
*[https://s3.amazonaws.com/linksprite/Shields/relay_shield/RelayShieldEagleFiles.zip Relay Shield Eagle Files]  
 
*[https://s3.amazonaws.com/linksprite/Shields/relay_shield/RelayShieldEagleFiles.zip Relay Shield Eagle Files]  
 
*[https://s3.amazonaws.com/linksprite/Shields/relay_shield/RelayShieldDemoCode.zip Relay Shield demo code for Arduino]
 
*[https://s3.amazonaws.com/linksprite/Shields/relay_shield/RelayShieldDemoCode.zip Relay Shield demo code for Arduino]
 +
 +
==How to buy==
 +
Here to buy Relay Shield on [http://store.linksprite.com/xbee-relay-shield/ store]

Latest revision as of 08:19, 16 September 2015

Introduction

The Relay Shield is an Arduino compatible smart module with 4 mechanical relays providing an easy way to control high voltage. The max switching power is 35VDC 70W for each channel. It can be directly controlled by Arduino through digital IOs with external 9V DC supply. With the XBee form socket and 315/433MHz RF module interface, the Relay shield can be remotely controlled, making it easy to use in robotics, industry control, smart houses etc.
Note: Take care the pins on the Shield should not be touched with USB connector of Arduino UNO when they are connected .

N02DH WITHOUT PACKAGED FRONT1.jpg

N02DH WITHOUT PACKAGED BACK.jpg


Features

  • Arduino, Arduino Mega compatible
  • 4 mechanical relays with photo-coupled circuit
  • Equipped with screw holes for easy installation
  • Light weight
  • Small form factor
  • Native Arduino compatibility
  • Extendible


Specification

Item Min Typical Max Unit
Voltage 7 9 12 VDC
Current 8 / 250 mA
Switching Voltage / / 35 VDC
Switching Current / / 2 A
Frequency Response -1 / 1 dB
Switching Power / / 70 W
Relay Life 100,000 / / Cycle
ESD contact discharge ±4 KV
ESD air discharge ±8 /
Dimension 80.0x58.0x21.2 mm
Net Weight 31±2 g

Schematics


Interface Function

4 groups of channels for High voltage connection
Terminal 1:
COM1- Common pin
NC1- Normally Closed, in which case NC1 is connected with COM1 when D0 is set low and disconnected when D0 is high;
NO1- Normally Open, in which case NO1 is disconnected with COM1 when D0 is set low and connected when D0 is high.
Terminal 2-4 are similar to terminal 1, except that the control ports are D1-D3.

9V DC power supply connection
The function of the Terminal and the Jack is the same since they are internally connected, and you can choose either of them in needs.

IO controlling 4 on-board relays
D0-D3 4pins could be connected directly with Arduino pin number of 7-4, so that four relays could be easily controlled by the Arduino.

315/433MHz RF control interface
Together with pin of GND and 5V, they are the interface for 315/433MHz RF with encoder module to control the 4 relays remotely.

XBee form Socket for directly control by Xbee
The 4 relays can be directly controlled by the Xbee through the 4 DIO ports of Xbee


Usage

With Arduino

Relay Shield could be directly controlled by Arduino.

Step1. Plug Relay Shield onto Arduino Duemilanove (or compatible) board;

Step2. Supply 9v DC power to Arduino;

Step3. Download the example code and run in Arduino IDE.

If using Arduino via its USB connection for power, you must also provide 9v DC power to the Relay Shield or the relays won't switch.

Relays 1-4 can be activated by setting Arduino ports 4-7 to output, and doing a digitalWrite(portNumber,HIGH).

Use COMx and either NCx (normally closed) or NOx (normally opened) connections to switch power through to the controlled device.

With RFBee

One RFBee controls one Relay Shield

Step1. Download Arduino code for the slave and master RFBee.
Step2. Plug the slave RFBee to the Relay Shield.
Step3. Supply the 9VDC power to the Relay Shield.
Step4. Power the master RFBee with 3.3V by UartSBee or other adapter.

One RFBee controls 3 Relay Shields

Step1. Download Arduino code for the slave and master RFBee.
Step2. Plug the slave RFBee onto the Relay Shield.
Step3. Connect the second and third Relay Shield to the mother shield by connecting 315/433MHz RF pins to hub1 and hub2. (Note: 5VDC and GND also need to be connected).
Step4. Supply the 9VDC power to the Relay Shield. (Note: the extended Relay Shields DO NOT need extra power supply).
Step5. Power the master RFBee with 3.3V by UartSBee or other adapter.

With RF Module

Step1. Plug and solder the Receiver onto the Relay Shield.
Step2: Supply the Relay Shield with 9VDC power.
Step3: Control the Transmitter.

Resources

How to buy

Here to buy Relay Shield on store