Spring Based Vibration Sensor Breakout

Spring Based Vibration Sensor

SW-18010P series are spring type, no directional vibration sensor trigger switch, any angle can trigger.

Switch is open circuit OFF-state , when it is static, when external force to touch and corresponding vibration, or movement speed achieve adequate (partial) centrifugal force, conductive pick feet will produce instant conductivity is instant ON-state, when external force disappear, switch back to open circuit OFF-state.

Switch have the identification P at the bottom, for completely airtight;

In the normal,switch life can reach20,0000 cycles lifespan

This series Switches have trigger high sensitivity

Electrical characteristics

Voltage: <12V
Current: <20mA
Conductive time: 2ms
Closed resistance: <30 ohm
Open resistance: >10M ohm

Mechanical characteristics

Temperature range: Storage: -40°C to 80°C, Operating: -40°C to 80°C
Pull force of terminal: 500gf for 1 minute
Humidity: 95% RH, 40°C for 96 hours
Operating lifespan: 100,000 cycles

Spring Based Vibration Sensor Breakout