Spyder
Contents
Introduction
PLC-UART-LS is designed to transparently move serial data over the power line network at a speed of 2kbps, and achieves the target of replacing serial cables by the ubiquitous power line network.
On the PLC-UART-LS motherboard, there is a 20-pin receptacle. Users can choose different daughter boards, such as RS232, RS485, USB or Ethernet, based on the interface needs. The motherboard also support DIP by optional pins that can be used to directly plug to user's board without doing screwing.
PLC-UART-LS have built-in packet-level repeater function. This feature can greatly extend the coverage of the power line communication. PLC-UART-LS has both physical and logic addresses. In a network, both physical and logic addresses can be used to address different nodes in the network.
Modle:PLC-UART-LS
Features
Application Ideas
Cautions
Schematic
Specification
Pin definition and Rating
Mechanic Dimensions
Usage
Hardware Installation
Programming
FAQ
Please list your question here:
Support
If you have questions or other better design ideas, you can go to our forum to discuss or creat a ticket for your issue at linksprite support.
Resources
How to buy
See Also
Other related products and resources.
Licensing
This documentation is licensed under the Creative Commons Attribution-ShareAlike License 3.0 Source code and libraries are licensed under GPL/LGPL, see source code files for details.
