Arduino dedicated wind sensor (Voltage output)
Introduction
Wind speed sensor is now being widely used in networking project, the sensor outputs an analog voltage value, with arduino drive, making it easier to measure wind speed. At the same time the wind speed sensor continuously monitors the amount of the size of the place of wind speed, wind speed air flow can be displayed in real time in which the tunnel is an important instrument of mine ventilation and safety parameters measured.
Applications
Can be widely used to measure wind speed greenhouses, environmental protection, weather stations, ships, docks, breeding environment.
Features
- Small size, easy to carry, simple installation
- High accuracy, wide range, good stability
- Reasonable structure design, good appearance quality
- New data lines can be good, long distance signal output, strong anti-interference ability
Specification
- Measurement Range: 0 ~ 30m / s
- Resolution: 0.1 m/s
- Supply voltage: 9 ~ 24V DC
- Output signal: 0 ~ 5V
- Working temperature: -40 degree C to 80 degree C
Interface definition
- 1: VCC: 12V
- 2: GND
- 3: Signal: Yellow one for voltage output
- 4: No connection
| Wind Speed (m/s) | Output Voltage (0-5V) |
|---|---|
| 1 | 0.17 |
| 2 | 0.33 |
| 3 | 0.5 |
| 4 | 0.67 |
| 5 | 0.83 |
| 6 | 1 |
| 7 | 1.17 |
| 8 | 0.33 |
| 9 | 1.5 |
| 10 | 1.67 |
| 11 | 1.83 |
| 12 | 2 |
| 13 | 2.17 |
| 14 | 2.33 |
| 15 | 2.5 |
| 16 | 2.67 |
| 17 | 2.83 |
| 18 | 3 |
| 19 | 3.17 |
| 20 | 3.33 |
| 21 | 3.5 |
| 22 | 3.67 |
| 23 | 3.83 |
| 24 | 4 |
| 25 | 4.17 |
| 26 | 4.33 |
| 27 | 4.5 |
| 28 | 4.67 |
| 29 | 4.83 |
| 30 | 45 |
