CuteDigi Starter Kit for Arduino ---Beginner Full Package

From LinkSprite Playgound
Jump to: navigation, search

Product Description

1-174.jpg

CuteDigi Arduino Starter Kit is a great gift for beginners and weathered professionals alike. Included is a multitude of inputs, outputs, and sensors to get you started in the wonderful world of Arduino. Checkout all the included goodies:

Included Items

  • 1 x Cuteduino: An Arduino Uno R3 compatible board.
  • 1 x USB A to B cable
  • 1 x Mini Breadboard
  • 40 x Male to male jumper wire: These are high quality wires that allow you to connect the female headers on the Arduino to the components and breadboard. 40 4" wires, 10 6", and 10 9" wires.
  • 2 x Tri-Color LED: Because everyone loves a blinky. Use this LED to PWM mix any color you need.
  • 2 x Red LEDs: Light emitting diodes make great general indicators.
  • 2 x Green LEDs:Light emitting diodes make great general indicators
  • 2 x Blue LEDs: Light emitting diodes make great general indicators.
  • 2 x Buttons: To interface with outside world
  • 2 x Photocell: - A sensor to detect ambient light. Perfect for detecting when a drawer is opened or when night-time approaches.
  • 2 x Thermistor - A sensor for detecting ambient temperature and temperature changes. 10K thermistor with a negative temperature coefficient.
  • 2 x Potentiometer: 2 adjustable 10K ohm potentiometer can be used to do ADC input experiments.
  • 5 x 300 Ohm Resistors - 5 current limiting resistors for LEDs, and strong pull-up resistors.
  • 5 x 1k Ohm Resistors - 5 current limiting resistors for LEDs, and strong pull-up resistors.
  • 5 x 5K Ohm Resistors - 5 current limiting resistors for LEDs, and strong pull-up resistors.
  • 1 x Buzzer
Retrieved from "https://wiki.linksprite.com/index.php?title=CuteDigi_Starter_Kit_for_Arduino_---Beginner_Full_Package&oldid=11242"