OpenMV CAM Image Sensor

Introduction

• 320x240 maximum image processing resolution

• Face Detection and pupil Tracking

• Motion Detection w/ frame differencing

• Blob detection w/ color tracking

• Can record GIFs/MJPEG videos

The OpenMV CAM Image Sensor runs Micropython which allows you to program it in Python to do any of the above things while being able to control I/O pins and read/write files on an SD card. It's basically a general purpose microcontroller like the Arduino with a rich amount of computer vision functionality.

Specifications

• 320x240 maximum image processing resolution in either grayscale or color. Your frame rate will be dependent on your application but can go up to 30+ FPS at smaller resolutions

• Executes compiled machine vision algorithms via high level Python User Interface

• Python scripts are compiled too before execution resulting in near zero overhead

• 9 user controllable multi-function GPIO pins (multi-functions include 1 ADC/DAC pin, 1 SPI bus, 1 I2C bus, 1 Serial Port, and 2 Servo Pins)

• Full Speed USB (12 Mb/s) serial port connection to your computer

• SDIO SD socket (25Mb/s) - We support both standard capacity and high capacity SD cards

• We have a RGB LED on board along with 2 IR LEDs

• The system draws about 150 mA in operation

• Lens mounts are M12 (comes with a 2.8mm 92 degree FOV lens with an easily removable IR filter)