Difference between revisions of "LinkerBot Platform"
(→Assembly Instruction) |
(→Step 1) |
||
| Line 75: | Line 75: | ||
===Step 1=== | ===Step 1=== | ||
[[File:Step1.jpg | 400px]] | [[File:Step1.jpg | 400px]] | ||
| − | *Remove the | + | *Remove the protection paper of plastic sheet, fixture, and speed encoder. |
*Insert fixture into the plastic sheet | *Insert fixture into the plastic sheet | ||
| + | |||
===Step 2=== | ===Step 2=== | ||
Revision as of 04:16, 28 November 2012
The LinkerBot platform is a kit which has the following features:
- Simple mechanical structure, and easy to assemble. The assembling instructions are provided.
- Speed encoders are embedded. They can be used to measure the walking distance, speed feedback, etc.
- Battery holder is provided that can hold 4 AA batteries.
- A switch is provided so that user can easily power on and off.
Parts List:
- 1 x Plastic sheet
- 2 x Electric motors
- 2 x Speed encoders
- 4 x Fixtures
- 1 x Omni-directional ball caster metal
- 1 x Battery holder
- 1 x Switch
- Many nuts and bolts
After assembling, it will look as:
The distance between inner rings of tires is 130mm. The distance between outer rings of tires is 150mm.
LinkerBot comes with speed encoder that can be used to measure the speed.
Specification of Motor
| Working Voltage | DC 3V | DC 5V | DC 6V |
|---|---|---|---|
| Working Current | 100mA | 100mA | 120mA |
| Gear Ratio | 48:1 | ||
| Idle Speed (loaded with tire) | 100 rpm | 190 rpm | 240 rpm |
| Diameter of Tire | 6.6cm | ||
| Idle Linear Speed | 20 meters/minute | 39 meters/minute | 48 meters/minute |
| Weight | 50g | ||
| Size | 70mm X 22mm X 18mm | ||
| Noise | < 65dB | ||
Assembly Instruction
Step 1
- Remove the protection paper of plastic sheet, fixture, and speed encoder.
- Insert fixture into the plastic sheet
