Proto Shield Kits

Introduction

Build your own Arduino shield using the compact and flexible Proto Shield kit. Solder together a limitless range of circuits and reuse it in all your Arduino projects. A standard 0.1" prototyping grid accepts commonly used through-hole parts and chips. You could also find a range of basic components are included to help you get started with your custom shield.

Features

• Standard Arduino compatible
• Large 0.1"*0.1" pitch prototyping area
• A variety of through-hole sizes to fit most parts
• Arduino UART and I2C port pin breakout for easy external communications
• Dual ISP breakouts for easy programming and stacking
• 3.3 volt, 5 volt, and ground power rails are easily available anywhere on the board
• Breadboard style prototyping area
• USB type B breakout
• Basic components included (buttons, switches, LEDs, resistors, USB jack)

Packing List

• 1x Arduino compatible Proto Board
• 1x B type USB connector
• 1x 40-pin 2.54mm male long header
• 1x 40-pin 2.54mm female header
• 2x 40-pin 2.54mm male header
• 1x 40-pin 2.54mm spacer
• 3x 8-pin 2.54mm female header
• 1x 6-pin 2.54mm female header
• 1x ISP female pin header
• 1x ISP male pin header
• 1x 10k Ohm rotary potentiometer
• 4x 1k Ohm through-hole resistor
• 2x 10k Ohm through-hole resistor
• 2x 3mm Red through-hole LED
• 2x 3mm Green through-hole LED
• 1x 3mm dual color through-hole LED
• 4x Mini push button switch
• 2x DPDT switch