Web Cam 3-axis Servo Kit for Real Time Video for pcDuino
Revision as of 10:57, 15 May 2013 by Katherine.d (talk | contribs)
Description
This a kit that includes web cam, 2 mini servo, and a servo fixture to assemble a complete web cam servo as following:
Webcam assembly steps
- Step 1. Take out the camera
- Step 2. Remove the pin
- Step 3. Remove the screws from the bottom
- Step 4. In order to fixed camera and shelf. Drill a hole then fixed with screw
- Step 5. Transform the camera shelf,cut off two flanks and plane the cut smoothly
- Step 6. After transformation, aligned the shelf with the botton of camera, making a mark in order to drill the screw hole.
- Step 7. To avoid covering the two screws on the bottom of camera, we need to drill two more hole on the flanks.
- Step 8. Now,fasten the camera on the shelf with screws.
- Step 9. Install the camera,twist the screws.
- Step 10. Install the Servo
- Step 11. Install the webcam stand,choose a properly hole. If the rocker arm is too long,cut off the unwanted parts. Fasten by the screw.
- Step 12. Disassembly the webcam stand, install another servo
- Step 13. Connect the camera and webcamstand
- Step 14. Trim the servo holder and install into the base panel.insert the stand into the base,fasten by screw.