Laser Head for DIY CNC 3 Axis Engraver Machine 2.5W

Introduction

This is a Laser Head for DIY CNC 3 Axis Engraver Machine PCB Milling Wood Carving Router Kit Arduino Grbl.

The optical output power is 2.5w

This is a Laser engraving machine dedicated module.

Specification

• Speckle pattern: dot (focus)

• The wavelength of this laser is 445nm(blu-ray)

• Driving mode: ACC (constant current driver)

• The cooling way: forced air cooling

• The input voltage: 12 v DC

• Input mode: XH - 2 p

• Dimension: 33 x33x62. 4 mm (including the thickness of the fan)

User Agreement

• The power of laser module is relatively high, only for industrial use. Lighting directly to eyes is forbidden which will hurt the eyes.

• It is prohibited to use in the place where there are inflammable materials and gas, or it could cause fires and explosions.

• Children are prohibited from contacting with the laser product.

• Do not open the case of this module or it could be damaged.