Starter Kit for Raspberry Pi

From LinkSprite Playgound
Revision as of 22:58, 18 November 2013 by Jingfeng (talk | contribs) (Created page with "This is a start kit for Raspberry Pi. Note: The Raspberry Pi is NOT included. The following items are included: *5V, 2A wall adaptor *Mico USB cable that can pass 2A cur...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This is a start kit for Raspberry Pi. Note: The Raspberry Pi is NOT included.


The following items are included:

  • 5V, 2A wall adaptor
  • Mico USB cable that can pass 2A current
  • Jump wires with variable length
  • USB serial debug cable
  • SD card 4GB with USB microSD card reader and SD card adaptor
  • Raspberry Pi Cobber breakout board with GPIO cable
  • Ethernet cable
  • Raspberry Pi enclosure
  • Breadboard
  • 5 x 10K ohm resistors
  • 5 x 510 ohm resistors
  • 1 x Red LED
  • 1 x Green LED
  • 1 x Blue LED
  • 3 x momentary buttons
  • 1 x LDR
  • 1 x 1uF capacitor


Raspberrypi starter kit.jpg

Retrieved from "https://wiki.linksprite.com/index.php?title=Starter_Kit_for_Raspberry_Pi&oldid=3734"