Difference between revisions of "OpenMV CAM Image Sensor"

From LinkSprite Playgound
Jump to: navigation, search
(Introduction)
(Introduction)
Line 1: Line 1:
 
== Introduction ==
 
== Introduction ==
 +
 +
The OpenMV CAM Image Sensor runs Micropython which allows you to program it in Python to do any of the above things while being able to control I/O pins and read/write files on an SD card. It's basically a general purpose microcontroller like the Arduino with a rich amount of computer vision functionality.
  
 
[[File:Camera M 1.jpg|640px]]
 
[[File:Camera M 1.jpg|640px]]
Line 18: Line 20:
  
 
*Can record GIFs/MJPEG videos
 
*Can record GIFs/MJPEG videos
 
The OpenMV CAM Image Sensor runs Micropython which allows you to program it in Python to do any of the above things while being able to control I/O pins and read/write files on an SD card. It's basically a general purpose microcontroller like the Arduino with a rich amount of computer vision functionality.
 
  
 
== Specifications ==
 
== Specifications ==

Revision as of 05:10, 9 September 2016

Introduction

The OpenMV CAM Image Sensor runs Micropython which allows you to program it in Python to do any of the above things while being able to control I/O pins and read/write files on an SD card. It's basically a general purpose microcontroller like the Arduino with a rich amount of computer vision functionality.

Camera M 1.jpg

Camera M 2.jpg

Camera M 3.jpg

Camera M.jpg

  • 320x240 maximum image processing resolution
  • Face Detection and pupil Tracking
  • Motion Detection w/ frame differencing
  • Blob detection w/ color tracking
  • Can record GIFs/MJPEG videos

Specifications

  • 320x240 maximum image processing resolution in either grayscale or color. Your frame rate will be dependent on your application but can go up to 30+ FPS at smaller resolutions
  • Executes compiled machine vision algorithms via high level Python User Interface
  • Python scripts are compiled too before execution resulting in near zero overhead
  • 9 user controllable multi-function GPIO pins (multi-functions include 1 ADC/DAC pin, 1 SPI bus, 1 I2C bus, 1 Serial Port, and 2 Servo Pins)
  • Full Speed USB (12 Mb/s) serial port connection to your computer
  • SDIO SD socket (25Mb/s) - We support both standard capacity and high capacity SD cards
  • We have a RGB LED on board along with 2 IR LEDs
  • The system draws about 150 mA in operation
  • Lens mounts are M12 (comes with a 2.8mm 92 degree FOV lens with an easily removable IR filter)