Difference between revisions of "OpenMV CAM Image Sensor"

From LinkSprite Playgound
Jump to: navigation, search
(Specifications)
(Introduction)
Line 3: Line 3:
 
The OpenMV CAM Image Sensor runs Micropython which allows you to program it in Python to do any of the above things while being able to control I/O pins and read/write files on an SD card. It's basically a general purpose microcontroller like the Arduino with a rich amount of computer vision functionality.
 
The OpenMV CAM Image Sensor runs Micropython which allows you to program it in Python to do any of the above things while being able to control I/O pins and read/write files on an SD card. It's basically a general purpose microcontroller like the Arduino with a rich amount of computer vision functionality.
  
[[File:open camare-2.jpg|640px]]
+
[[File:OpenMV CAM.jpg|640px]]
  
 +
[[File:OpenMV CAM-2.jpg|640px]]
  
 
+
[[File:OpenMV CAM-3.jpg|640px]]
[[File:open camare-3.jpg|640px]]
 
 
 
[[File:open camare-4.jpg|640px]]
 
  
 
*320x240 maximum image processing resolution
 
*320x240 maximum image processing resolution

Revision as of 09:18, 21 November 2016

Introduction

The OpenMV CAM Image Sensor runs Micropython which allows you to program it in Python to do any of the above things while being able to control I/O pins and read/write files on an SD card. It's basically a general purpose microcontroller like the Arduino with a rich amount of computer vision functionality.

OpenMV CAM.jpg

OpenMV CAM-2.jpg

OpenMV CAM-3.jpg

  • 320x240 maximum image processing resolution
  • Face Detection and pupil Tracking
  • Motion Detection w/ frame differencing
  • Blob detection w/ color tracking
  • Can record GIFs/MJPEG videos

Specifications

Open camare.jpg

  • 320x240 maximum image processing resolution in either grayscale or color. Your frame rate will be dependent on your application but can go up to 30+ FPS at smaller resolutions
  • Executes compiled machine vision algorithms via high level Python User Interface
  • Python scripts are compiled too before execution resulting in near zero overhead
  • 9 user controllable multi-function GPIO pins (multi-functions include 1 ADC/DAC pin, 1 SPI bus, 1 I2C bus, 1 Serial Port, and 2 Servo Pins)
  • Full Speed USB (12 Mb/s) serial port connection to your computer
  • SDIO SD socket (25Mb/s) - We support both standard capacity and high capacity SD cards
  • We have a RGB LED on board along with 2 IR LEDs
  • The system draws about 150 mA in operation
  • Lens mounts are M12 (comes with a 2.8mm 92 degree FOV lens with an easily removable IR filter)