Difference between revisions of "Proto Shield Kits"

From LinkSprite Playgound
Jump to: navigation, search
(Interface Function)
(Introduction)
Line 1: Line 1:
 
== Introduction  ==
 
== Introduction  ==
 
Build your own Arduino shield using the compact and flexible Proto Shield kit. Solder together a limitless range of circuits and reuse it in all your Arduino projects. A standard 0.1" prototyping grid accepts commonly used through-hole parts and chips. You could also find a range of basic components are included to help you get started with your custom shield.
 
Build your own Arduino shield using the compact and flexible Proto Shield kit. Solder together a limitless range of circuits and reuse it in all your Arduino projects. A standard 0.1" prototyping grid accepts commonly used through-hole parts and chips. You could also find a range of basic components are included to help you get started with your custom shield.
 +
 +
 +
[[File:Proto shield kit.jpg]]
  
 
== Features==
 
== Features==

Revision as of 06:32, 7 January 2013

Introduction

Build your own Arduino shield using the compact and flexible Proto Shield kit. Solder together a limitless range of circuits and reuse it in all your Arduino projects. A standard 0.1" prototyping grid accepts commonly used through-hole parts and chips. You could also find a range of basic components are included to help you get started with your custom shield.


Proto shield kit.jpg

Features

  • Standard Arduino compatible
  • Large 0.1"*0.1" pitch prototyping area
  • A variety of through-hole sizes to fit most parts
  • Arduino UART and I2C port pin breakout for easy external communications
  • Dual ISP breakouts for easy programming and stacking
  • 3.3 volt, 5 volt, and ground power rails are easily available anywhere on the board
  • Breadboard style prototyping area
  • USB type B breakout
  • Basic components included (buttons, switches, LEDs, resistors, USB jack)


Packing List

  • 1x Arduino compatible Proto Board
  • 1x B type USB connector
  • 1x 40-pin 2.54mm male long header
  • 1x 40-pin 2.54mm female header
  • 2x 40-pin 2.54mm male header
  • 1x 40-pin 2.54mm spacer
  • 3x 8-pin 2.54mm female header
  • 1x 6-pin 2.54mm female header
  • 1x ISP female pin header
  • 1x ISP male pin header
  • 1x 10k Ohm rotary potentiometer
  • 4x 1k Ohm through-hole resistor
  • 2x 10k Ohm through-hole resistor
  • 2x 3mm Red through-hole LED
  • 2x 3mm Green through-hole LED
  • 1x 3mm dual color through-hole LED
  • 4x Mini push button switch
  • 2x DPDT switch

Interface Function

600px-ProtoShield Kit.jpg